We will have hotrod, chopper, and kustom parts and vehicles for sale here from now on. Most of these are items for sale by Old Gold Garage Co. If you have something for sale you can email it to me at oldgoldgarage@att.net and if it's not lame I will post it when I have time(in other words, no mopeds, mustangs, or ground effect kits) thanks
Dan

Saturday, June 23, 2012

1962 Chrysler Newport custom For Sale!


1962 Chrysler Newport for sale
my wife is gonna sell her Newport 2 door hardtop. It has a crate 350 Chevy motor, 700r4 overdrive automatic trans with floor shifter. Edelbrock carb, dual exhaust with bellflower tips(sounds great)this could be a daily driver, very straight body, shaved and custom taillights, nice red interior, pearl white with bronze roof. Supremes with thin whitewalls. The brakes have been completely rebuilt and converted to power brakes with a dual reservoir MC. It stops great. Completely rebuilt front end last month. Currently registered and insured. Have driven this car on long distances with no problems, gets great gas mileage too. Email oldgoldgarage@att.net for more info
$13,000



Thursday, December 22, 2011

'66 LeMans/GTO tribute project-SOLD





The motor has a fresh set of heads. I put a bunch of money into the motor last month, including a new cam, plugs, wires, cap, rebuilt carb. All the steering components are new, and the upper and lower a Arms have all new bushings. The inner fenders are new and installed, as well as a new battery tray. I just put a new set of Cooper Cobra raised white letter tires on the nicely refinished rally II's, and new beauty rings. I installed the eibach lowering springs in the front, but I left the stock springs in the rear because I like the rake. I've got all the stainless trim from around the car, including the front and rear window frames. All the window glass is in tack and is still in the doors and it all works fine. The rear window glass is out of the car and in good shape. The windshield is out of the car and is cracked. It has a new GTO hood with scoop insert.
I'm probably forgetting a bunch of stuff. Email me with any questions. text 818-438-0216 or email Brian4bes@gmail.com
As far as trades go, offer whatever you have to trade. Car, truck, vintage Van, motorcycles, vintage trailer, whatever.

Sweet Riviera for sale

Joey from QOTSA '65 For Sale....I would if I could.





1965 Buick Riviera (BLK on BLK)
401 Nailhead.
Air Ride Suspension
New upper a arms and sway bars
Pefect interior and headliner
Alpine hideaway screen CD player w/ removable face, amps, sub, iPod hook up, dual batterues
All interior & extorior lights work
14x7 reverse 96 spoke strait lace zeniths w/ 520s
Straight body w/ all mint condition moulding and trim.
Factory tilt wheel
Factory power seats, windows & windwigs.

$ 30K OBO
Contact: 47knucklesickle@gmail.com

Tuesday, May 17, 2011

1958 Dodge Town Panel- SOLD

I've decided I want a '59 or '60 El Camino so it's time to sell the panel truck. My friends think I'm crazy, and it has been one of the best running driving cars I've ever owned. It has a 305 Chevy V8 with a 2 barrel Rochester, HEI ignition, and a 700R4 overdrive transmission, it probably get about 20mpg. The front clip is camaro with power steering and power disc brakes, it's got a camaro 10 bolt rear also. The Truck is bagged with top of the line Vi-Air system, 2 compressors(chrome) tank, valves etc. It will do front/back/side to side, and has heavy duty bags so i could haul my bikes in the back. The floors are 12 guage steel with tie down loops for motorcycles or whatever. It's C notched, but only lost two inches of interior height. It has factory bucket seats with new black diamond pleat upholstery with gold foil piping and matching door panels that still need to be installed. It has a nice CD player in the glovebox which is in the middle of the dash, and has a remote. Gennie shifter with custom blown glass shifter knob that matches the gold paint. It has a new mustang gas tank with sending unit but it's not hooked up to the guage yet. All other guages work. Impala taillight lenses in the stock buckets, Lucas flamethrower headlights(like Ed Roth's Outlaw)one year only grille, stainless rock guards on the rear fenders, custom exhaust with glasspacks and dump tubes. It has high end sound deadening in the front, no carpet or headliner yet. Horn, ahooga horn, turn signals, high beams etc all work. New Battery, newer alternator, This truck runs great and drives great. It has been to Santa Maria and all over so-cal, and even though the paint is only a year old there are some rock chips, scratches etc. Still looks really nice though. The wheels are super rare and if you dont want them I will take some cash off the price. I will post more pics next week of the details. 

SOLD!

Thursday, April 28, 2011

Triumph chopper project-SOLD

650 5 speed chopper project for sale. Paint by Nick O Teen, original Arlen Ness springer. Needs wiring finished, fuel lines, other misc.... SOLD
 Email oldgoldgarage@att.net for more info.

pictured here on the wall at my tattoo shop. It has since been replaced with a BSA...



Tuesday, March 29, 2011

Survivor XLCH SOLD

My friend and Old Gold Garage's in house HD mechanic, Gordon is selling his bitchin '66 XLCH. It's all original other than paint. The factory color was purple! The current paint was done when it was still fairly new. Comes with accessory hard bags. It's magneto ignition, rare mufflers, and akront aluminum rims are still there. This is a running and riding bike. Registered with black and yellow California plates. Super rare to find a bike like this these days. Buy it and ride it the way it is or restore it to it's former glory. We prefer to sell it to someone in California to maintain it's black plate status but will consider selling out of state to the right buyer. Call the shop for more info
(805)644-1959
SOLD

                                       









Tuesday, March 15, 2011

60's drag rod bubble top project car-SOLD



SOLD


I was originally building it as a Coffin body slingshot front engine dragster that is street legal that could do nostalgia bracket racing. (!) I have the CAD drawings for the frame and build plan.

If you want to sponsor the car and have it built to your specs, that can be arranged. We have a Pro shop that can do anything.

I will also consider a Harley or Harley parts trade deal.

Photos here:

Thanks,
Ritch